TRENDnet 54Mbps Wireless G PoE Access Point TEW-434APB (Version A1.0R) Specs



TEW-434APB Wireless PoE Access Point is today's link to Wireless Technology. Compliant with the IEEE Wireless Networking Standard 802.11g, it provides Direct Sequence Spread Spectrum (DSSS) operation for transparent bridging and roaming capabilities for wireless nodes. The TEW-434APB also provides WDS bridging functions, allowing users to connect two or more Access Points together, wirelessly. With this Wireless Access Point and Wireless Network Adapters, users can connect to Ethernet/Fast Ethernet LAN at home or office to access network resources with coverage up to 300 meters.

Hardware
StandardsIEEE 802.11b/g (Wireless LAN)IEEE 802.3u (Fast Ethernet); IEEE 802.3af PoE
Media Connector10/100Mbps, Half/Full Duplex
LED IndicatorsWLAN, LAN
Power7.5V DC, 1A External Power Adapter
48V DC from PoE source via Ethernet Port
Dimensions

150 x 110 x 30 mm (5.9 x 4.3 x 1.2 inches) (without antenna)

Weight226g. (8 oz.)
Temperature
  • Operating: -0° ~ 40°C (32° ~104°F);
  • Storage: -25° ~ 70°C (-13° ~ 158°F)
HumidityMax. 90% (non-condensing)
CertificationsCE, FCC
Wireless
Frequency Range2.412 ~ 2.484 GHz
Modulation
  • 802.11b: DSSS
  • 802.11g: DBPSK/DQPSK/CCK/OFDM
ProtocolCSMA/CA with ACK
Data Rate (Auto Fallback)
  • 802.11b: 11, 5.5, 2 and 1Mbps
  • 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
Operating ModesAP, AP Client, WDS, AP+WDS or Repeater Modes
Channel1~ 11 Channels (US) 1~13 Channels (EU)
Security64/128-Bit WEP (Hex/ASCII), WPA/WPA2 (802.1x)
WPA-PSK/WPA2-PSK
MAC Address Filter, SSID Broadcasting Control
Antenna1 x 2dBi Detachable Diversity Antennas with Female Reverse SMA Connector
Output Power13 dBm (min)
Transmit Power
  • 802.11b: 18dBm (typically)
  • 802.11g: 15dBm (typically)
Receiving Sensitivity
  • 11Mbps 8% PER @ -78dBm (typical)
  • 54Mbps 10% PER @ -68dBm (typical)